关键词:
Bending (deformation)
摘要:
As a key device for rocket launch, the erecting device's load-bearing performance is crucial for the success. In response to the instability phenomenon of the vertical plate of a certain rocket erecting device under the loading condition at the moment of erection, in order to analyze the reasons for the instability of the vertical plate, a finite element simulation model of the erecting device was established considering the actual load situation. The compressive load on both sides of the vertical plate under the working condition of erection was extracted, and based on the theory of small deflection thin plate elastic stability, the local instability of the vertical plate was explained: the compressive load of the vertical plate at the moment of erection exceeded its critical instability load, manifested as the characteristic of lateral bending deformation instability. Based on the analysis results, local reinforcement measures for the vertical plate were proposed. Finite element analysis and erecting loading tests were conducted on the vertical device after reinforcement. The results indicate that the stress consistency at the corresponding measurement points of the left and right vertical plates is good, and the stress deviation between the simulation calculation and the test result is not more than 10%. The lateral bending deformation decreases from 5. 3 mm before reinforcement to 1. 6 mm after reinforcement, proving the effectiveness of structural reinforcement. The relevant conclusions provide a reference for the local stability analysis of large and complex structures. © 2025 Beijing Kexue Jishu yu Gongcheng Zazhishe. All rights reserved.